89S52 Programmer using Ardiuno
This project was lost, luckily while digging I found a backup file. I am now making this project available for public use. Released as is with no warranties, I am not liable for any harm done to your system. This should be used ONLY FOR EDUCATIONAL PURPOSES. The client file requires .NET Framework 4.0. The arduino sketch was compiled and tested with Arduino IDE 1.0.5 and Gizduino 328 (Arduino clone in the Philippines by e-Gizmo Mechatronics Central). The program for the 8051 was compiled with SDCC.
Connection Diagram:
Instructions:
1. Select the Correct COM Port
2. Connect
3. Load up the Hex file
4. Upload Hex file to your MCU
5. Grab a beer and enjoy!
1. Select the Correct COM Port
2. Connect
3. Load up the Hex file
4. Upload Hex file to your MCU
5. Grab a beer and enjoy!
Click the Link below for the sketch and the client
DOWNLOAD FILES HERE
DOWNLOAD FILES HERE
Post a Comment